Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.

ALL ABOUT pellet burner (καυστήρες)

Pellet fireplaces are appliances that burn small pellets which appear to be rabbit feed made out of organic materials like compacted wood chips, sawdust, barks etc. Some also burn corn kernels, nutshells and wood chips. They are really easy to operate along with their efficiency and combustion is higher compared to stoves or fireplaces and plays a part in the very least polluting of the environment. Their heating capacities consist of 8000 to 90000 btu/hr. As a result them suitable for apartments, condominiums in addition to homes.


2 kinds of pellet fuel appliances can be obtained fireplace inserts and freestanding stoves. Fireplace inserts are squeeze into existing fireplaces. Pellet-fired boilers and furnaces supplement oil and gas fired boilers and furnaces in your house heating systems.

Besides, these appliances can take the pellets until they're required for use. It possesses a feeder device which drops a few pellets in the combustion chamber per time. Latest models consists of small thermostat and computer to manage the feed rate. A flue pipe which is often upwards for the roof or the sidewall is utilized to discharge the exhaust gases.

Pellet-Feeding Systems

There are 2 systems bottom-fed and top-fed pellet stoves.

In top-fed stoves the auger feeds the pellet into the side or the top of combustion chamber in an angle. This minimizes the likelihood of &ldquoburn back&rdquo although system cannot keep ash in the firebox grate. Leading to formation of clinkers on the grate impeding air-flow and also the fire dies out because of this. Requires low ash pellets.

Bottom-fed systems move pellets horizontally in the combustion chamber. Ashes and clinkers are shoved aside by the incoming pellets.

Combustion Air Controls

These appliances use draft-inducing fans to provide and vent combustion air and gases respectively. The issues connected with this technique are reduced by abiding ton, maintenance and processes instructions and also by use of low-ash pellets.


How and where an appliance is installed is dependent upon it type. Fireplace inserts are positioned in old fireplaces whereas freestanding stoves may be used within a large free space. You ought to however continue with the installation guidelines of the manufacturer so as to ensure safety and operational efficiency.


Reduce rusting with the system by removing unused pellets once heating is conducted with, increasing of suit can even be reduced to minimum if your flue vent is regularly cleaned.

For proper use, regularly inspect the motors and fans and effectively maintain them. Furthermore, remember to follow the instructions of the manufacturer regarding its maintenance and operation.

Quality, Standards and Option of Pellet Fuel

Quality: many pellet fuels have a very moisture content of 5-10%, when compared with wood's 20%. Pellets from agricultural waste produce more heat than wood even though they have higher moisture content.

Standards: there's 2 grades of pellet fuel Standard and premium. This disparity is due to improvement in the volume of inorganic ash. Standard contains utmost 3% while Premium has not more than 1%.

You should be guaranteed to buy pellets with proper ash content as most pellet stoves won't operate properly together with the wrong pellet type. However, manufacturers have redesigned and designed their stoves to burn pellets of various ash contents.

Availability: On the decades the production of pellets has risen significantly. Today there are approximately 30 manufactures of pellet stoves and inserts. Prior to purchasing a machine, make sure that you can access the best pellet fuel supplier and have knowledge of the accessible fuel. Dealers within the appliances may also be suppliers from the fuel or may recommend a trusted supplier. Nevertheless you can examine the phone director (under &ldquofuel&rdquo or &ldquopellet fuel&rdquo) or inquire at the local garden supply stores or tree nurseries.

Benefits and limitations of pellet fireplaces (τζακια pellet)

Benefits: They normally are cleaner, safer plus more convenient than the amount of wood appliances. Additionally they pose little fire hazard and wish no cleaning.

Limitations: In spite of the advantages, they are complex along with their components are very expensive. They require electricity to function the pellet feeders, controls and fans.

Cost of pellet burner (καυστήρες) and fuel

Generally, pellet fireplaces (τζακια pellet) are simpler to install than other heaters such cordwood-burning heater. Additionally, the cost of pellet fuels is about $120 to $200 per ton or simply just $3 to $4 per 18kg. Therefore pellet-fuel appliances often are less expensive to operate compared propane-fuelled appliances and resistance heating.

Don't be the product, buy the product!